Microwave sensor light YWMS003

Welcome to read YWMS003 Microwave Sensor Light!

YWMS003 Ceiling Light Design Microwave Sensor LED Lights LED Security Light with Motion Sensor 

The product adopts microwave LED sensor mould with high-frequency electro-magnetic wave (5.8GHz) and integrated circuit, SMD LED. It gathers automatism, convenience, safety, saving-energy and practical functions. The wide detection field is consisting of detectors. It works by receiving human motion. When one enters the detection field, it can start the load at once and identify automatically day and night. Its installation is very convenient and its application is very wide. Detection is possible to go through doors, panes of glass or thin walls.

SPECIFICATION:

Power Source: 220 -240V/AC                                  Power Frequency: 50/60Hz

Detection angle:180°/360°                                       Transmission Power: <0.2mW

Daylight Sensor: 5lux, 15lux, 50lux,2000lux (choice)

Detection Distance: wall: 5-15m (adjustable)          ceiling: 2-8m (radius), adjustable

Hold Time: 10s, 90s, 3min, 10min (choice)              HF System: 5.8GHz CW radar, ISM band

Rated Load: FK(12W )   FB(16W)   FC(20W)        Installing Height: wall: 1.5-3.5m

Detection Motion Speed: 0.6-1.5m/s                                                  ceiling: 2-4m

Power Consumption: approx 0.9W                         Stand-by Period: 0s,30s, 10min, +∞ (choice)

Stand-by Dimming level: 10%, 20%(choice)           Detection Range: 50%, 100% (choice)

Lifetime and Warranty:

FUNCTION:

Ø  Can identify day and night: It can work in the daytime and at night when two knobs are on above position (Daylight Sensor). It can work in the ambient light less than 5LUX when two knobs are on below position (Daylight Sensor). As for the adjustment pattern, please refer to the testing pattern.

Ø  Hold time is optional. It can be set according to the consumer’s desire. The minimum time is 10sec.The maximum is 10min.

Ø  It offers 3 levels of light: 100 %–> dimmed light (20%optional) –>off; and 2 periods of selectable waiting time, motion hold time and stand-by period; selectable LUX value and choice of detection area.