Infrared Sensor Lamp-YWIS002

Welcome to discover the YWIS002 Infrared Sensor Lamp – A Premium Outdoor Solution with E27 Bulb Holder and Human Sensor Light Technology.

Experience the excellence of the YWIS002, a compact outdoor lamp featuring an E27 Bulb Holder and advanced infrared sensor technology.

SPECIFICATIONS:

• Power Source: 220-240V/AC
• Power Frequency: 50/60Hz
• Detection Range: 180°
• Detection Distance: Up to 9m (<24℃)
• Ambient Light: Adjustable from <3-2000LUX
• Working Temperature: -20~+40℃
• Time Delay: Min. 10sec ± 3sec, Max. 5min ± 1min
• Working Humidity: <93%RH
• Installation Height: 1.8-2m
• Rated Load: Max. 60W (E27)
• Detection Moving Speed: 0.6-1.5m/s

Lifetime and Warranty:

• Lifetime: At least 26,000-45,000 hrs
• Warranty: 3 years

FUNCTIONS:

• Day and Night Recognition: Customize the working state based on ambient light conditions. It operates during both daytime and nighttime when set to the “sun” position (max) and functions in ambient light less than 3LUX when set to the “moon” position (min). For adjustment details, please refer to the testing pattern.
• Continuous Time-Delay: If it receives a second induction signal within the initial induction, the lamp restarts the timer from that moment.
• Adjustable Time Delay: Set the time delay according to your preferences, with a minimum of 10sec ± 3sec and a maximum of 5min ± 1min.

YWIS002 Motion Sensor Light and E27 Bulb Lamp Holder

INSTALLATION:

1. Switch off the power.
2. Unscrew the screws used to secure the lampshade and the base, then remove the lampshade.
3. Pass the wire through the bottom hole and connect the power wire to the connection-wire column as per the connection-wire diagram.
4. Install the sensor lamp in the desired position using the provided screws. Attach either an incandescent bulb or an energy-saving bulb.
5. Reattach the lampshade, electrify the setup, and conduct a test.