Sensor Bulb YWSH006

Welcome to the convenience of our YWSH006 Light-Control Sensor Holder – a small yet powerful solution designed for versatile and efficient lighting.

This E27 holder operates seamlessly with a built-in timer, allowing automatic control of light based on ambient-light conditions. Resilient to changes in ambient temperature and humidity, it offers both convenience and practicality, ensuring the load operates exclusively during nighttime. Ideal for applications like road lights and garden lights, it is widely used and easy to install.

YWSH006 Light-Control Sensor Holder E27 with Built-in Timer

SPECIFICATIONS:

• Detection Range: 360°
• Rated Load: Max. 100W (E27)
• Power Source: 110-240V/AC
• Built-in Timer: 1, 2, 4, 8, 12 Hours
• Power Frequency: 50/60Hz
• Ambient Light: < 5-15LUX

LIFETIME AND WARRANTY:

• Lifetime (hr): 26,000-45,000 hours minimum
• Warranty: 3 years

INSTALLATION:

1. Fix the holder in the desired installation location as per the figure provided.
2. After sensor installation, connect it with the lamp, and then proceed with testing.

TEST:

1. Switch on the power.
2. Use an opaque cloth to cover the detector during daytime testing.
3. When covered, the ambient light will be reduced, triggering the lamp to turn on.
4. Removing the cloth will automatically turn off the lamp.
5. For timed control, turn the knob to “AUTO” when ambient light is less than 5LUX (darkness), allowing it to work for 12-14 hours before automatic shutoff.
6. Alternatively, set the knob to specific time durations (1h, 2h, 4h, 8h, 12h), and the lamp will operate for the corresponding time before turning off. The settings reset upon completion.

Experience intelligent and efficient lighting control with the YWSH006 Light-Control Sensor Holder E27 with Built-in Timer.